| |
You are making an offer on a 125 Cubic Foot Gemco V Blender / MX-122 located in the USA. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
Please Note: This machine is still installed at the seller's facility. A scope of work agreed to by the seller may be required before any removal operations can begin.
Model: Gear drive blender
Type: V shape - high speed
Capacity: 125 cu. ft.
Serial #: GBL-20035
Maximum material density: 65 lbs. per cubic foot
High speed intensifier bar
Maximum capacity: 125 cu. ft. (without bar)
Minimum capacity: 63 cu. ft. (without bar)
Maximum capacity: 131 cu. ft. (with bar)
Minimum capacity: 119 cu. ft. (with bar)
Stainless steel product contact parts
Pneumatic operated butterfly discharge valve
Includes two pieces of mezzanine and stairs
Date of manufacture: October of 2000
Agitator speed: 678 rpm
Maximum operating temperature: 40 degrees C.
Vessel speed: 6.2 rpm
Electrics: 230/460volt, 60hz, 3ph
Drive motor (shell): 15 horsepower drive
Drive motor (bar): 60 horsepower drive
Positioning motor: 3horsepower / 460 volt
Air requirement: 90 psi
- Manufacturer Gemco
- Year 2000
- Model 125 cubic foot
- Capacity Size 125 CU FT
- Products Run Still installed / Out of service
- Material of Construction STAINLESS STEEL
- Estimated Shipping Weight 8,000 LBS
- Length 0 FT
- Width 0 FT
- Height 0 FT
- Voltage 480 VOLTS
- Frequency 60 HERTZ
- Phase 3
- Removal Difficulty MODERATE
- Requires rigging or removal YES
- Requires a flatbed truck YES
- Level of shipment preparation necessary STILL INSTALLED
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
Location:
Puerto Rico
Dimensions: 0x0x0 FT
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
|
Store