| |
You are making an offer on an Yamato Pulvis GB 22 Spray Dryer located in the USA. This lot is being sold "as is, where is." We recommend that you contact an EquipNet sales representative to set up your own inspection.
Yamato Pulvis GB 22 Spray Dryer Includes Glass AttachmentsThe GA22 uses a fluid bed and it can be used to granulate powders or to dry moist powders.
It is capable of processing samples of between 50g and 300g and well suited for expensive samples and laboratory experimentsThe setting of testing conditions is easily entered from the operation panelThe testing mode can be easily observed as the chamber is made of superhard glass
Since it is equipped with impellers, consistently good fluid conditions are obtainedProcessing Capacity is 50g to 300gOperating Temperature is 40 C to 200 CLiquid Sample Flux is up to 28ml/minSpraying Nozzle for Liquid and Air
- Manufacturer Yamato
- Model GB22
- Serial Number Lot A5800131
- Height 5 FT
- Chamber Diameter
- Material of Construction UNKNOWN
- Removal Difficulty READY TO SHIP
- Estimated Shipping Weight 250 LBS
- Requires rigging or removal NO
- Requires a flatbed truck NO
- Level of shipment preparation necessary UNCRATED/LOOSE
- Additional Component Dimensions 36” x 18” x 5'
Contact Information
If you need further information, please contact our Sales Department at 888.371.6555, outside USA at +1.781.821.3482, or click here to send us a message, or by email to sales@EquipNet.com
Payment Methods:
Certified Check, Bank Check, Company Check w/Bank Guarantee, or Wire Transfer
Crating, Rigging, and Shipping Info:
Buyer is responsible for all crating and shipping charges. EquipNet can furnish a quote upon request. Please contact sales@equipnet.com.
If picking up in Canton, MA a vehicle must have a mandatory height equal to a standard dock height of 50 inches (unless the item is handheld).
Location:
Massachusetts
Dimensions: 5 FT
Disclaimer
Please note: All listing descriptions take precedence over what may be showing in the photo. If you have any questions at all on this listing, please contact EquipNet.
|
Store